Ana içeriğe geç

Model Number A1707. Released June 2017, this MacBook Pro features Kaby Lake processors up to the 2.8 GHz quad-core Intel Core i7 processor with Turbo Boost up to 3.8 GHz.

327 Soru Tümünü görüntüle

Not the typical flex gate problem.Haven't found same problem with mine

The problem is display turns off but backlight still there, keyboard lights up, touch bar is there, and external monitor still displays. It occurs at random (sometimes screen twitches first and then problem occurs). When I close and open the lid the display goes back.

tried resetting PRAM and SMC, problem still there.

tried in safe mode, problem still there.

tried downgrading to Monterey from latest Ventura, problem still there.

I can boot my laptop on any angle.

Not even once I dropped my laptop.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Give this a try, restart the system and press the Shift (⇧) key to enter safe mode. Try using the system this way to see if the display reacts in the same way

Reference: Mac startup key combinations

I’m suspecting the T-CON board which typically sits within the display lid area has failed here. The retina displays have a higher scan frequency so it’s possible the clocking within the T-CON has failed but only the higher one. Running in Safe Mode we are keeping the system at the lower clock rate.

If that works I think that nails it as a T-CON issue.

So unless you can get to an independent repair person with the needed skills and tools to fix the board which is that part that hangs off of the display to get yours working again. Otherwise, it’s a new display assembly! MacBook Pro 15" Retina (Late 2016-2017) Display Assembly following this guide MacBook Pro 15" Touch Bar 2017 Screen Replacement

MacBook Pro 15" Retina (Late 2016-2017) Display Assembly Görseli

Ürün

MacBook Pro 15" Retina (Late 2016-2017) Display Assembly

$507.99

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Tried it just now. Sadly, display reacts in the same way in safe mode. %#*@, new display it is :(( . Thanks for the help!

tarafından

Yorum Ekle

Yanıtını ekle

Glynn II Lumasag sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 28