Eşyalarını Tamir Et Topluluk Mağaza

Released on September 24th 2021, the iPhone 13 mini is a smaller version of Apple's iPhone 13 and is the second mini iPhone. It features a 5.4-inch OLED, an A15 Bionic processor, and dual rear cameras.

31 Soru Tümünü görüntüle

Seçenekler

13 Mini restarting randomly SMC PANIC - ASSERTION FAILED - BSC failure

Hi,

my iPhone 13 Mini crashes and restarts every 3 minutes. Error log shows SMC BSC failure of type 0x1000 , which should be the proximity flex cable. However, after disconnecting it, the error continued to exist. Is this possible? Should I still change the proximity flex cable altough disconnecting it didn't result in a fix?

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Disconnecting it doesn’t resolve the issue. You’ll need to connect a known good to get the error to clear. The issue is that it’s not getting communications from a sensor on this cable. Disconnecting it will continue to produce this error since the sensor is still not present. It needs a good sensor that can communicate properly with the CPU to be connected.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

2 Yorum:

thanks! I will try that and report my results asap.

tarafından

Did it end up getting fixed?

tarafından

Yorum Ekle

Yanıtını ekle

Zhi-Yuan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 27

Son 30 gün: 102

Her zaman: 891