Eşyalarını Tamir Et Topluluk Mağaza

Model A1990 / EMC 3359. Released in May 2019 with new 6-core and 8-core processor options.

88 Soru Tümünü görüntüle

Seçenekler

MacBook Pro not turning on

This morning, I was running MATLAB on my Macbook Pro, and then the screen froze for about 5-10 seconds then proceeded to go black. Afterwards, I could not power on my MacBook.

I opened it up and saw that the battery still worked and some portions of the logic board were warm (after about 2 hours). However, no matter how many times I pressed the power button, the fans would not spin nor would any lights turn on. I watched one  of Louis Rossmann's videos and tried to diagnose the issue, but the PPbus to SSD didn't seem to have an absurdly low resistance.

I do not recall spilling liquid or dropping it, so I assume that the SSD was fried, but realized that may not be the case.

May I get some professional diagnostic before I go ahead and recycle the laptop?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Sorry, there’s little we can offer remotely here. All we can offer is guidance in you repairing your system.

Deeper issues like you appear to have requires tracing out the logic. Here a good inspection of both sides of the logic board looking for damaged components as well as checking the power rails.

You’ll need access a set of schematics and board view drawings. Micro-soldering tools and skills.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Literally CollegeBoard sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 25