Eşyalarını Tamir Et Topluluk Mağaza

Model A2159, EMC 3301. A refresh of the entry-level 13" MacBook Pro. Available in Silver and Space Gray. Released July 2019.

112 Soru Tümünü görüntüle

Seçenekler

Replaced screen only to break "ZIF data power connector"

I was given an 2019 A2159 MacBook Pro with an broken screen, I was able to use the laptop after I removed the screen pluged-in via USBC-HDMI, and also it ran on battery without its screen. Once I replaced the screen, the battery no longer works, the culprit being I broke the ZIF connector lid for the battery data cable

Block Image

https://imgur.com/a/JI4AsTh

The thing is, I'm sure I broke that piece off on my first go.. only for it to not work upon the screen install. I don't have any electronics expertise to diagnose this further.

  1. Can I source a replacement ZIF or ZIF clamp? I'll have a professional solder it on if need be.
  2. Any chance something else could have gone wrong, and its just a coincidence?

Update (09/11/23)

Block Image

https://imgur.com/a/yIEPMKl

Closer up photo

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

@thomasmulford - The latch is replaceable if that’s what went on a one way trip in the process of unlatching it. I can’t tell if that’s the issue based on the image.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

3 Yorum:

Please add some better photos of what you think you broke.

tarafından

@thomasmulford - Not good 😫 while it’s a bit clearer I think the main shell is damaged so replacing the latch won’t help you here.

This will require someone with good micro soldering skills and a small nozzled hot air station to replace the connector.

tarafından

Thanks Dan! I'll look around for business who can solder it!

tarafından

Yorum Ekle

Yanıtını ekle

Thomas Mulford sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 49