Eşyalarını Tamir Et Topluluk Mağaza

{A1989 / EMC3214}—Released in July 2018, the 13" MacBook Pro features quad-core i5 and i7 processors and Intel Iris Plus integrated graphics.

199 Soru Tümünü görüntüle

Seçenekler

MacBook not starting after battery replacement

Replaced the battery on my 2018 Macbook Pro Touchbar, turned it on, and it started, Coconutbattery said it was at 100% battery health with 0 battery cycles. I took out the battery, used the adhesive strips to glue it in, and then put it back together. Now, when I try to start it, it shows no signs of life. I've tried reinstalling the battery several times, as well as starting the Macbook while plugged in. Is there anything else I could do? How else can I troubleshoot this issue? Thanks in advance :)

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Did you forget to fully shut down the system the second time? Refer to Step 1 in this guide MacBook Pro 13" Touch Bar 2018 Battery Replacement

At this point you need to connect a second Mac via USB-C using Configurator2 App to recover things.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

Thanks for the response! It looks like I did forget to disable auto boot before doing the repair. Will I be able to get the Macbook working again? If so, how do I go about doing that. Thanks again!

tarafından

@maximm65709 - You need to leverage a second system to run Confurator2 apps

tarafından

Yorum Ekle

Yanıtını ekle

Maxim M sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 41