İtibar: 421
7
1
1
This morning I accidentally fried my R3 I don’t know how, it was hooked up to the 9V battery and it was running blink as a test suddenly the lights went out and the 47uf capacitors started getting hot. So it’s time for an upgrade I have the R4 on its way but is there any way to get the R3 temporarily working
Bu iyi bir soru mu?
İtibar: 785,2b
1,1b
895
2,3b
@thomas35549 a blown fuse would not cause this, If anything I would suspect the voltage regulator U1 (AMS1117) next to your DC In Jack.
Here is the layout Uno 3 Component Layout and here is the schematic Uno 3 Schematic The datesheet for the voltage regulator is here AMS1117
Bu yanıt yardımcı oldu mu?
Ok thank you
Son 24 Saat: 0
Son 7 gün: 7
Son 30 gün: 19
Her zaman: 61
2 Yorum
It might be a blown capacitor, can you check?
Ryan tarafından
@ryan0001 idk how also I don’t have a volt meter available I believe I blew a fuse and that is causing them to get hot
Thomas tarafından