Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for top and front loading Whirlpool brand washers.

426 Soru Tümünü görüntüle

Seçenekler

I push the start button it dings but won't come on.

I have a duet steamer whirlpool module # wfw9600Tw01. Had error code F28 would not reset after being unplug for 10 mins tried several times door would not unlock. I took bottom off and found the pull down tab and unlocked the door but it still will not reset. Door continues to lock and will not start cycle. The power button comes on but when I push the start button it dings but won't come on. What can I do

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi @lisaseydler

An F28 error code indicates a communication problem between the Central Control Unit (CCU) and the Motor Control Unit (MCU).

Here's the tech sheet for the washer that may help.

Go to p.5 error code F28, to see what to check for, that may be the cause of the problem.

It also mentions how to check the doorswitch system in Step.9 of the check procedure.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Lisa Seydler sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 12