Seçenekler

Screen backlight blinking when turning on iMac, then returns to normal

Guys, I have this imac late 2009, what happens is that when I turn it on, the backlight blinks for a few seconds, then the screen works perfectly for hours, however, when I turn on the computer with the screen brightness at maximum, the backlight it has more difficulty staying lit, so I need to turn it off and on again until it manages to stay lit, when I turn off the Mac with the lowest brightness, I can turn it on again.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

1 Yorum

@ramonferre18311 all you have to do is measure the output voltages on CN3. If those stay stable, you know it's your backlight strips. If they don't, you know it's your LED board.

oldturkey03 tarafından 8 Ara 2023

Yorum Ekle

Gönderildi: 5 Ara 2023

Seçenekler

A common issue in this series is the LED driver board needing repair or replacement here's the guide to get to it iMac Intel 21.5" EMC 2308 LED Driver Board Replacement Often the MOSFET's or capacitors need replacing.

Here's one source for the part iMac 21.5" LED Backlight Board Apple P/N 661-5304

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

1 Yorum:

Thank you very much! I was thinking that it could be a problem with the power supply or the LCD backlight itself when it was turned on, but now I feel confident buying a new backlight board. When the new LCD board arrives I will complement the answer.

Ramon Ferreira tarafından 6 Ara 2023

Yorum Ekle

iMac Intel 21.5" EMC 2308

Screen backlight blinking when turning on iMac, then returns to normal

1 Cevap

Yanıtını ekle