Eşyalarını Tamir Et Topluluk Mağaza

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

2265 Soru Tümünü görüntüle

Seçenekler

Device Won’t Power On. Need help identifying missing components

I inherited this older iPhone 7 from my grandpa. He tried to repair it himself (took off the front glass) and I could see somethings were tampered with. The screen was unplugged for starters. I did notice that there is some thermal paste visible which makes me think maybe he took out a component? I’ll include a picture below, but if anyone could help me identify if a part is missing and if so, which part it is.

I plugged the screen back in and when I charge the device I do feel it getting warm, so im not sure what else could be wrong.

Any help is appreciated :)

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

There is nothing but a protective film this will not have any affect power on. There must be another issue battery might be in sleep mode.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

How could I get the battery out of sleep mode? I’ve already left it on the charger for about 30 mins and still no power on.

tarafından

Yorum Ekle

Seçenekler

ifixit has some great pictures of the iPhone 7 internals you can compare to: https://www.ifixit.com/News/8409/iphone-...

From personal experience I would check the cables (Specifically the ones under the loose panel) as they are very delicately connected without the screw panel holding them in place.

By advice is to follow one of the ifixit step by step guides (iPhone 7) for reassembly and verify each cable and component is correctly hooked up. If this still doesn't work you might have a malfunctioning part (did the screen in fact get repaired from its original issue?). The goods news is that if you feel it getting warm when charging, the logic board and battery are likely working and you are just not seeing any output on the screen.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Josh Moncarz sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 37