Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for your LG TV.

1350 Soru Tümünü görüntüle

Seçenekler

My Oled tv doesn´t turn on after bezel was bent,

Hi

I recently acquired an LG oled TV (OLED55CX6LA) for free. The tv won´t turn on after

the bezel around the screen was dented (very small dent!).

The TV only goes to standby and when I try to turn it on the relay clicks once and it goes back to standby. I tried disconnecting the four panel connectors to the T-con board one by one to no effect. I then disconnected the lower cable connecting the main board to the t-con board and then turned on the tv. Still no picture but the relay didn´t click when the cable was disconnected.

Any ideas on what the issue might be?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

At first this sounded like a possible power supply issue but since there was no relay click after you disconnected the mainboard I would suggest you check for any damages on your mainboard and your T-board. I believe the issue might be revealed there. Maybe the dent caused minor but critical damage?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Hi, thank you for answering. I will take them out and let somebody look at them (I have very limited experience with electronic repair).

tarafından

Yorum Ekle

Yanıtını ekle

Ágúst Ingvarsson sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 9

Her zaman: 72