Ana içeriğe geç

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1504 Soru Tümünü görüntüle

iPhone 3G water damage because of cupholder filled with water

Hi, One day i came home from school and had to go to the bathroom bad so i ran in and placed my phone in a cupholder filled with a little bit of water in it. I was in the bathroom for about 10 minutes and when i came out, i took my phone out of the cupholder w/ water in it.The screen is too dark to see and it seems like it is off. I can only see the screen when its directly faced toward the sun. How can i fix it, can i fix it??

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

MichaelResenDeez, sounds like your backlight is out. The first thing to do is to clean your phone using this guide. Once cleaned properly change your battery (It is just my preference) you can reevaluate your damage. If your backlight is still not working, you will have to replace the LCD. All the guides for your phone are available right here The water may have shortened it out. Of course, that is the first step, if even the replacement LCD won't work, take a look at the backlight coil 6R8 on the logic board as well as the backlight IC. you can check on here for a great explanation of the backlight circuit. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

MichaelResenDeez sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 595