Broken flex keyboard dont Work

Question

MacBook Pro 16" 2019

Repair guides and disassembly information for the MacBook Pro 16'' released in November of 2019. Model A2141, EMC 3347.

211 Soru Tümünü görüntüle

Rodrigo Ricardo Perez Memije @rodrigorica3074

İtibar: 11

1

Gönderildi: 3 Nis 2024

Seçenekler

Broken flex keyboard dont Work

Broken flexor. Keyboard dont work

I was cleaning my 2019 MacBook Pro 16 and I changed the thermal paste, but I think I broke a cable and the connector of another one where the flex cable goes. The point is that my keyboard doesn't work, it lights up but doesn't register any key, the Touch Bar works im from México my keyboard hace the ñ Character

"I've seen this cable online, but I'm not sure if it's the one that provides the keyboard input."

https://www.ebay.com/itm/195424308901?mk...

In the first image only the lock is broken but i think it Works

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

1 Yorum

lást question this connector maybe fit [image|3273531] i going to orden all the things and send it to a technical guy

Rodrigo Ricardo Perez Memije tarafından 4 Nis 2024

Yorum Ekle

2 Cevap

Seçilen Çözüm

Dan @danj

İtibar: 479,6b

Self employed contract worker

35

329

971

Gönderildi: 3 Nis 2024

Seçenekler

Ouch! You've got a lot of damage here!

The 1st image is your keyboard connection but we can't see the connection side as your finger is on the cover flap. You'll need to take a second image so we can see the contacts of both the cable end as the logic board connector.

The second image based on the part number is the TouchID flex cable P/N 821-02317. Here's one source TheBookYard UK - MacBook Pro 16" Touch ID Flex Cable

Jumping to the third image we have a damaged fan cable which will require a new fan unit MacBook Pro 16" (2019) Right Fan. it also looks like the port cabe is also damaged MacBook Pro (A1989, A1990, A2141, A2159, A2251, A2289, A2338 Mid 2018-2022) USB-C Board

Images 4 & 5 are repeat images

Ürün

MacBook Pro (A1989, A1990, A2141, A2159, A2251, A2289, A2338 Mid 2018-2022) USB-C Board

$14.99

Ürün

MacBook Pro 16" (2019) Right Fan

$29.99

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

3 Yorum:

The keyboard lights up, only the connector of the flex cable broke, but it doesn't detect any key. Could it be because of that connector that applies pressure? Is there a repair for this case? The Touch ID doesn't work, but the fan is functional.

Rodrigo Ricardo Perez Memije tarafından 3 Nis 2024

@rodrigorica3074 - The keyboard backlight uses a different connection than the keyboards data connections don't get distracted by that. The ZIF latch (lock) needs to be present it compresses the cable into the sockets contacts. So it sounds like you lost the latch then. You'll need to look for it around your work area as it can fly off a good meter! If you can't find it to put back on or you damaged it you'll need to get a replacement logic board connector to then carefully slide off the latch to put onto your logic board connector. You will need to replace the TouchID cable and the fan unit doesn't look that good. While the fan may run there is a tachometer within it that the circuitry on the cable is dependent on. it looks too damaged to be functional. The last cable connection is the USB-C port cable connector is missing! I see the cut cable end not the connector. I suspect in the process of taking the bottom cover off the cable was cut. Look at the parts images above to compare to yours.

Dan tarafından 3 Nis 2024

Thanky you bro

Rodrigo Ricardo Perez Memije tarafından 4 Nis 2024

Yorum Ekle

lást question this connector maybe fit [image|3273531] i going to orden all the things and send it to a technical guy — Rodrigo Ricardo Perez Memije
The keyboard lights up, only the connector of the flex cable broke, but it doesn't detect any key. Could it be because of that connector that applies pressure? Is there a repair for this case? The Touch ID doesn't work, but the fan is functional. — Rodrigo Ricardo Perez Memije
@rodrigorica3074 - The keyboard backlight uses a different connection than the keyboards data connections don't get distracted by that. The ZIF latch (lock) needs to be present it compresses the cable into the sockets contacts. So it sounds like you lost the latch then. You'll need to look for it around your work area as it can fly off a good meter! If you can't find it to put back on or you damaged it you'll need to get a replacement logic board connector to then carefully slide off the latch to put onto your logic board connector. You will need to replace the TouchID cable and the fan unit doesn't look that good. While the fan may run there is a tachometer within it that the circuitry on the cable is dependent on. it looks too damaged to be functional. The last cable connection is the USB-C port cable connector is missing! I see the cut cable end not the connector. I suspect in the process of taking the bottom cover off the cable was cut. Look at the parts images above to compare to yours. — Dan