Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for your LG TV.

1349 Soru Tümünü görüntüle

Seçenekler

TV screen damage after disassembly?

I was given an LG 50UH5530 for free that had a backlight problem. I replaced the backlight strips ok, but now the picture on the right half of the screen isn't displaying greys correctly. Pure white shows up with slight red tint, black and even colors seem ok, but any mid-grey tones just show up as black. I swapped the ribbon cables to the driver boards and the problem stayed on the same side. Did I ruin the display while I was poking around in there, or is there additional troubleshooting I can do for this?

Block Image

^ Pure black/white ok, but greyscale all messed up

Block Image

^ meant to be pure grey screen

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

@kylemartin72918 that could still be a backlight issue if you got some "not so high quality" strips. It is also possible that this is related to issues with the driver boards. Check your voltages on the T-con board (use the big inductores to measure) since it is possible that your Gamma IC may be having issues. Of course, double check your work and make sure that all the diffuser sheets etc are properly installed etc.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks! I combed over everything and found a small crack in the panel. Not sure if it happened during or before my repair, but I think that's what did it.

tarafından

Yorum Ekle

Yanıtını ekle

Kyle Martin sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 23

Her zaman: 23