Eşyalarını Tamir Et Topluluk Mağaza

Apple's mainstream 2021 iPhone was released on September 24th and comes with a 6.1" OLED display, a dual 12 MP camera system, and in five available colors. Successor to the iPhone 12.

97 Soru Tümünü görüntüle

Seçenekler

Display error /Face ID

Quick question I have iPhone 13 it had 3rd party screen on it and the original proximity sensor on it was error about the display saying not genuine part put an original apple screen on and the original proximity sensor on and error msg went away for the screen, but I managed to get bit of water in the phone now getting Face ID error and display error and the proximity sensor isn't working now question is if I replace the proximity sensor will the errors go away? Or is the sensor coded? Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Unfortunately, all iPhone models' biometric authentication systems' (Touch ID, Face ID) parts are software locked down, meaning that when installed a non-apple-paired part, it will refuse to work. The sensor, yes, is "coded", or married to the motherboard, unless Apple re-pairs another sensor to the motherboard.

You have two options: to not use Face ID entirely, or purchase the Apple Self Repair parts from their store; I will put the links below.

Repair Manual: https://support.apple.com/en-us/100402
Repair Parts: https://www.selfservicerepair.com/en-US/... iPhone / iPhone 13 / TrueDepth Camera / TrueDepth Camera Bundle
You might also need the service kit for the iPhone 13.
Troubleshooting: https://support.apple.com/en-us/101966#d...

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

CRAMS11 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 17

Her zaman: 17