Eşyalarını Tamir Et Topluluk Mağaza

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

321 Soru Tümünü görüntüle

Seçenekler

Can EM10 be fixed with just a soldering iron?

Hi, I opened up a Nintendo ds lite to shell swap it and EM10 filter just isn't there, resulting in the ds not charing. My question is... Is it possible to replace this part with a simple soldering iron or is this too hard? What should I need? Soldering iron, braid, flux, and a very fine tip? I'm a total beginner, so any directions and help would be very appreciated. Thanks!!

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Hi!

I successfully repaired this with a soldering iron many times.

You need:

  • Soldering iron (with a tiny tip is recommended)
  • Flux
  • De-soldering (copper) braid
  • Magnifier (recommended)

Please make sure that you take the time and be very carefull! It’s easy to damage the solder pads.

You can either replace the part (recommended) or either bridge the connections for the EM10).

The guide you need: Repairing a Nintendo DS that is not charging

Good Luck with the repair! If you have any questions, do not hesitate to ask!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 4
Yorum Ekle

Yanıtını ekle

Enerd sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 15

Her zaman: 50