Schematics and pictures of circuit board. Very often the wire feeder stops working because of dead relay. You can replace the defective one with a more durable 8A relay.
Stef_AN @stefan27396
İtibar: 159
1
Gönderildi: 3 Haz 2024
Schweissgeraet 1
Bu iyi bir soru mu?
3 Yorum:
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
jayeff tarafından 3 Haz 2024
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
Stef_AN tarafından 3 Haz 2024
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 5
Her zaman: 76
1 
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
jayeff tarafından
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
Stef_AN tarafından
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
jayeff tarafından