Ana içeriğe geç

Model A1200 with 2.16 or 2.33 GHz Core 2 Duo processor

112 Soru Tümünü görüntüle

24" iMac Refuses to boot?

My Imac refuses to boot ; I have taken off the bezel but I can not find the diagnostic leds ; can someone please post a photo of the leds showing where they are located .

Thank you in advance .

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 3
1 Yorum

Diagnosed off your site ; bought new power supply from you , ( US to Australia in 6 days ) ; swapped it in ; pushed the ram in really hard ; booted up and awaaaay we go . Thank you very much . Even us older folks can follow your excellent guides . Your help was invaluable and I hope to spend lots more time on my trusty old Mac .

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

The diagnostic LEDs are located to in a column next to the memory slot. Please see the image below.

LED 1 : Trickle power from the power supply to main logic board.

LED 2: Main logic board has detected trickle power from the power supply when the unit is powered on.

LED 3: Computer and video card are communicating with each other.

LED 4: Computer and LCD panel are communicating with each other.

Update

Block Image

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

geoff ellis sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 3,303