Ana içeriğe geç

Smaller, thinner, quieter model of the Playstation 2 (SCPH-700xx) released by Sony in September, 2004.

91 Soru Tümünü görüntüle

Laser lens is always going forward and gets stuck on disc turntable

Hello I bought ps2 770xx everything was good until one day laser lens started going forward and gets stuck on disc turntable and it starts make clicky sounds. Please help <3. Thank you

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

Hey I opened it and it was only because the ribon cable was disconedted. Thanks for help

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi!

Okay, click sounds most of the time points to a faulty worm motor and thus it need to be replaced.

Please open up the PS2 Slim and first check the laser slider, if this looks all good then test the worm motor. You can test it with putting (carefully) some presure on the slider and see if the worm motor let the laser move freely. If the laser is stuck or does not want to move easly, then the worm motor really need a replacement.

Please let us know how it goes and good luck!

Bu yanıt yardımcı oldu mu?

Puan 1

4 Yorum:

Hey i think that motor is ok. The clicky sound is made by the laser lens is bouncing of the disk turnable in middle.

tarafından

Hmm, do you have a video for us to show us what exactly the laser is doing? Thanks in advance!!

tarafından

Hey I opened it and it was only because the ribon cable was disconedted. Thanks for help

tarafından

Hi!

Ah! Glad that it’s just the ribbon cable!! My pleasure! Good luck with gaming :)

tarafından

Yorum Ekle

Yanıtını ekle

Frost Man sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 6

Son 30 gün: 22

Her zaman: 37