Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1961 Soru Tümünü görüntüle

How to replace the power IC, iPhone 3GS logic board?

So I posted awhile back about a 3gs I had got a hold of that did not seem to power on no matter what I do. I've already went through the standard trouble shooting. I've replaced the dock, and the battery. More recently another 3gs I got a hold of with a good logic board that works with the same combination of new parts that I've put together...

Now that being said its definitely the logic board. I also tried putting the bad logic board in another phone and it didn't work in there either. I'm having issues finding a good walk through for a power IC replacement or another means of troubleshooting that I can perform to diagnose what the issue is with the logic board itself. If anyone could point me in the right direction it would be much appreciated!

In addition I do have a multi-meter, but I can't seem to find any diagrams as to what I should be testing on the board or what kind of read outs I'm supposed to expect from it to determine whats working and whats not.

Thanks in advance!

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Cobaltthegreat start of with measuring the circuit as attached to this answer. The reason why you have a hard time finding instructions on replacing the power IC, is because it is not an easy thing to do. The only instructions I have seen (and definitely saved) are here. Again, hope you have some experience and good tools, as well as great eyesight :-) Hope this helps, good luck.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 1


Thanks sir! I have some soldering experience but that's about it. The broken logic board was a freebie so I figured it would be a good place to start tinkering. Nothing to lose! :) I'll let you know what I find out.


Sounds good, try to use hot air or IR soldering. Let us know how it is working out.


Yorum Ekle

Yanıtını ekle

Cobaltthegreat sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 4

Her zaman: 9,714