Need a Service Manual for Miller Spectrum 375 (Not X-TREME)

Question

Plasma Cutter

A plasma cutter slices through metal by directing air or an inert gas via a plasma torch, triggering an electrical arc, and then pushing plasma through the torch tip, reaching temperatures of up to 45,000 degrees F, making it a swift method for metal cutting.

2 Soru Tümünü görüntüle

Terry Knox @terryknox

İtibar: 1

Gönderildi: 1 Mar 2025

Seçenekler

Need a Service Manual for Miller Spectrum 375 (Not X-TREME)

Anyone have the service manual or Mainboard schematic for a Miller Spectrum 375 Plasma Cutter?

Specifically looking for the part number for Q6, mine is blown beyond recongnition. Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

2 Yorum:

Hi @terryknox

I realize that you want the schematics for the 375 model and not the 375 X-treme, but was wondering if they used the same pcb board.

Have you checked this link as it has the schematics for 2 different pcb. Maybe one is the same as yours.

Worth a look .

Cheers

jayeff tarafından 1 Mar 2025

Thanks for the reply. Yes I have looked they are totally different designs, one is an inverter type the other is a transformer type design. Thanks for the input though.

Terry Knox tarafından 2 Mar 2025

Yorum Ekle

Hi @terryknox

I realize that you want the schematics for the 375 model and not the 375 X-treme, but was wondering if they used the same pcb board.

Have you checked this link as it has the schematics for 2 different pcb. Maybe one is the same as yours.

Worth a look .

Cheers — jayeff
Thanks for the reply. Yes I have looked they are totally different designs, one is an inverter type the other is a transformer type design. Thanks for the input though. — Terry Knox

Plasma Cutter

Need a Service Manual for Miller Spectrum 375 (Not X-TREME)

Yanıtını ekle