Eşyalarını Tamir Et Topluluk Mağaza

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Soru Tümünü görüntüle

Seçenekler

iPhone 3GS stuck at logo after battery replacement

Hello!

I replaced my iphone`s baterry with a new one and now it is stuck at logo.

The phone starts only when I connect it to the power cord (PC or wall adapter) and it is unrecognized by Itunes (itunes detects nothing actually)

I replaced the battery because it had almost 600 cycles and I supposed that was the problem. Before replacing the battery iphone could stay on only with a power cord.

Do I have to reset it or I fried the logic board and now it s useless?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

baghy, try the old battery and see if it gets past the logo. If it does, you know it is the replacement battery. Also, make sure that you have the right battery and are not using a 3G battery. Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

baghy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 408