Released October 31, 2019 as a participant in Google's "Android One" program (guaranteeing a "pure" or mostly-stock Android OS implementation with precedence afforded to Google services over OEM-branded offerings), it is identified with model numbers XT2013-1, XT2013-2 and XT2013-4 (codenamed "troika").
Bu yoruma uygun yeri bulmak için bu konuyu kaydırın. Ardından, taşımak için "Bu yazıya yorum ekle"ye tıklayın.
7 Yorum:
@hamidmasoumi really hard to make out. Take another picture just this time zoom out so we can see the whole board,. Then mark the place where you see this object. Then do a close up but ensure that you save a large, well focused image. The one you added is only 570x286 and does not enlarge well.
@oldturkey03 Sorry my microscope is not that good, I just need the general description, I can get its value from its neighboring components but I don't what is it to measure.
First I thought it might be an inductor for the phone loud speaker.
@hamidmasoumi if you can point out where it is on the board, I can use the schematic to identify it. Right now, I have no idea where it is located. Just use a phone camera etc. and take a picture identifying the general location.
@hamidmasoumi of course it had to be the sub board :-) No, sorry I do not have that either. Looking at the location I would think it's a coil (ferrite bead)
@hamidmasoumi really hard to make out. Take another picture just this time zoom out so we can see the whole board,. Then mark the place where you see this object. Then do a close up but ensure that you save a large, well focused image. The one you added is only 570x286 and does not enlarge well.
oldturkey03 tarafından
@oldturkey03 Sorry my microscope is not that good, I just need the general description, I can get its value from its neighboring components but I don't what is it to measure.
First I thought it might be an inductor for the phone loud speaker.
Hamid Masoumi tarafından
@hamidmasoumi if you can point out where it is on the board, I can use the schematic to identify it. Right now, I have no idea where it is located. Just use a phone camera etc. and take a picture identifying the general location.
oldturkey03 tarafından
@oldturkey03 Sorry for the quality in advance.
Do you have its sub board schematics?!!
I could only find its main schematic that I uploaded here.
Hamid Masoumi tarafından
@hamidmasoumi of course it had to be the sub board :-) No, sorry I do not have that either. Looking at the location I would think it's a coil (ferrite bead)
oldturkey03 tarafından
2 tane daha yorum göster