Ana içeriğe geç

Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

794 Soru Tümünü görüntüle

Battery issue after optibay HDD installation

After taking out the superdrive and putting in an optibay that holds an HDD, my battery isn't charging. The battery is "Normal" and the charger is fine, but the battery will not charge. It says "Not charging". Any help is greatly appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Try reconnecting the battery connector to the logic board. If that doesn't work, try resetting the system management controller (SMC) with the instructions from http://support.apple.com/kb/HT3964

1.) Shut down the computer.

2.) Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.

3.) On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.

4.) Release all the keys and the power button at the same time.

5.) Press the power button to turn on the computer.

Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Good luck!

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Bud sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 957