Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Repair guides, disassembly, and troubleshooting information for the third generation Sony PlayStation 5 DualSense controller. Identified by model number CFI-ZCT1W and motherboard model BDM-030.

Audio jack not working

The audio jack was working fine until yesterday but today when fired up my console my wired JBL headphones wont connect. I tried with other controller and they seemed to work fine so not a headphone issue definitely a controller one... anyone know how to fix this?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
3 Yorum

Hi Sam!

Is the Dualsense it's firmware up to date? Just in case!

Do you use the controller on the PS5 or PC?

Do other headsets work or airpods or whatever?

Thanks!

tarafından

I use it with ps5 and yeah firmware is up to date👍

tarafından

Okay! That’s good! Do you have any other headset to test?? This would be the ultimate test.

In the worst case, you do need to replace the headphone jack.. this requires soldering and soldering experience!

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hey,

This is a common issue with PS5 controllers, I've attached a YouTube link for a couple quick diagnosis methods. Unfortunately if none of these methods get your controllers audio jack working again you may have to replace the audio jack which will require you to disassemble the controller and do some soldering.

Here is the YouTube link.

https://youtu.be/0goVWJZ_Ozo?si=A6N_OHSO...

Hopefully this helps, best of luck!

Bu yanıt yardımcı oldu mu?

Puan 1

3 Yorum:

Thanks so much man cleaned it with alcohol issue resolved 👍👍

tarafından

All good, glad you got it sorted.

tarafından

Glad that it is working! Have fun gaming again!

tarafından

Yorum Ekle

Yanıtını ekle

Sam Medadkar sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 11

Son 7 gün: 63

Son 30 gün: 271

Her zaman: 657