Ana içeriğe geç

Remove Display Cable from the Logic Board

Dear All.

I do not figure out how I can remove the Display Cable from the Logic Board without distroying it.

Could someone describe exactly how to do it, it would be perfect if there would be some additional pictures to show how.

Best regards

MacWiniac

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Carefully read the guide all the way through before doing this: PowerBook G4 Aluminum 15" 1.5-1.67 GHz Display Data Cable Replacement

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

Dear Mayer.

I have read all the guides carefully, but in step 15 it is only stated to disconnect the 13 cables, but not how specifically to disconnect the display cable from the Logic Board. However in step 14 there is specifically described how to disconnect this special connector. That is what I like to have for the display cable.

Best regards,

MacWiniac

tarafından

Yorum Ekle

Yanıtını ekle

MacWiniac sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 465