I got an Imac 27” mid 2011 EMC2429 which was not turning on. No chime, no fan working, Nothung.
First I thought it is PSU. I tried my PSU on another Imac it works fine. On my Imac I tried another working PSU same result not turning on.
Then I have noticed that when I plug it in, Led 1 on motherboard blinks for a second. Anybody could help me what can be broken, How to fix it?
Bu iyi bir soru mu?
İtibar: 495,6b
35
338
974
Then I’m suspecting you didn’t seat the CPU chip cleanly into the socket, often the pins get bent. This system is hard to mount the heat sink springs and the chip.
You’ll need to pull the CPU out and check the socket pins. Be careful as bending them back can snap them. You’ll want to soften the spring a bit.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 4
Her zaman: 38
Did you take the logic board out and refreshed the thermal paste on the CPU?
DanJ tarafından
Yes, it is completely fresh
Tural Huseynov tarafından