Eşyalarını Tamir Et Topluluk Mağaza

1Soru Görüntüle

Seçenekler

Anyone able to help with this very old ultrasound machine?

I have an error code 4027 that comes up sometimes and a problem where the machine wont shut donw properly. Something somewhere is failing. Can anyone help. Board schematics or experiencing fixing them would be reallyy helpful. Thank you. Anthony

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Summary (SonoSite Titan Issue):

  • Error 4027 on the SonoSite Titan is most commonly related to power distribution faults, unstable voltage rails, or a board communication failure during shutdown.
  • Machine not shutting down properly strongly points to failing capacitors, DC-DC converter problems, battery sense issues, or loose/oxidized connectors.
  • Full schematics are not publicly available; only service manuals or partial diagrams can usually be found.
  • DIY checks include: testing with/without battery, checking the internal power board for bad capacitors, reseating connectors, and inspecting for cracked solder joints.
  • If no obvious component damage is found, the fix usually requires a donor board or a biomedical repair technician.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Anthony sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 10

Her zaman: 10