Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Section dedicated to various repairs that are not related to appliances or electrical equipment, more focused on wood, furniture assembly and home repairs.

Outdoor faucet issues looking for advice

Block Image

If I did this right you will see a photo of my garden hose. When I took it off in winter time the 2 top pieces are from the faucet. I tried everything wd40, lockjaw pliers I can't get them unfused. Here is the problem though I would like to use my faucet and attach a new hose and I am having trouble finding anything that would fit

Block Image

Hopefully I have a photo of the faucet. I did buy a brass connector but it won't fit. Curious for any advice thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Try screwing the hose back on. If it’s a bayonet type fitting try pulling the second ring toward the hose while pulling the bottom gently away from the tap. (Faucet, I’m in uk)

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

appreciate the answer it is tight and wedged on there. I sprayed quite a bit of wd 40 on it. I think wd 40 is available in UK

tarafından

Yorum Ekle

Yanıtını ekle

Engineer Trainee sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 43

Her zaman: 43