My wireless access has lost its distance

I must now stay almost beneath my airport extreme with my MacBook Pro (17in mod 1151). If I leave the room, all is lost. I used to be able to go to the house next door and work. It was fine until about the time I upgraded to 10.6.

Is there something somewhere that allows varying the RF power of the card in my MBP? Or is it the Airport Extreme? Can I manipulate its power output?

Gary Hall

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
Yorum Ekle

Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

This is a Known Issue with 10.6.

Look here for some things to try.

New wireless devices added in the neighborhood can can cause interference too, especially if of the same signal range ... Sometimes changing the channel can overcome this.

Good Luck,

N.

Bu yanıt yardımcı oldu mu?

Puan 3

Yorumlar:

seems good advive.

I found that range seriously depended on the channel I chose (middle = longest range) when I tried to avoid neighbours channels.

try it!

tarafından

Yorum Ekle

I have an airport express and it was almost touching my modem and it would cut out in some spots like you say yours is. If you have anything that may be causing interference with your airport extreme just try moving it.

Also how old is your airport extreme and do you have any wireless home phones that are 2.4GHZ because those may be causing interference.

Here's an article that might help.

Also updating your software and firmware could help.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

hallgc sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 2,743