Eşyalarını Tamir Et Topluluk Mağaza

Afterglow Wireless PS3 Controller Motherboard Replacement

Giriş

The replacement of the motherboard requires the complete removal of the battery, trigger buttons, joy sticks, and vibrations motors. All of which will require soldering for removal.

Neye ihtiyacın var

  1. Afterglow Wireless PS3 Controller Motherboard Replacement, Back Cover: adım 1, 2 resimden 1. Afterglow Wireless PS3 Controller Motherboard Replacement, Back Cover: adım 1, 2 resimden 2.

    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

    Düzenle

  2. Afterglow Wireless PS3 Controller Motherboard Replacement, Motherboard: adım 2, 1 resimden 1.

    • Desolder the battery connection from the motherboard.

    • Use this guide for more information on soldering.

    Düzenle

  4. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 3, 2 resimden 1. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 3, 2 resimden 2.

    • Unscrew the two 9mm Phillips #0 screws that secure the motherboard to the controller front plate.

    Düzenle

  5. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 4, 2 resimden 1. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 4, 2 resimden 2.

    • Detach the main motherboard fom the front pate by carefully pulling it off.

    • Be careful of the trigger buttons when pulling out the motherboard. The bottons have mini-motherboards secured in place on the front plate. Carefully pull these out.

    Düzenle

  6. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 5, 2 resimden 1. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 5, 2 resimden 2.

    • Remove two button padding from the back of motherboard.

    Düzenle

  7. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 6, 2 resimden 1. Afterglow Wireless PS3 Controller Motherboard Replacement: adım 6, 2 resimden 2.

    • Desolder the four button connections from the motherboard.

    • Desolder the joy stick connections located on the front.

    • Use this guide for more information on soldering.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Natalie Cox

Üyelik tarihi: 02/17/17

207 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 üyesi

USFT-HOFFMAN-S17S19G5

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 19

Her zaman: 1,002