Eşyalarını Tamir Et Topluluk Mağaza

Air Hog Smash Bots Motherboard Replacement

Giriş

This guide allows you to replace the motherboard of the Smash Bot. A soldering iron will need to be used for this, directions on how to solder can be found here.

Neye ihtiyacın var

  1. Air Hog Smash Bots Motherboard Replacement, Batteries: adım 1, 1 resimden 1.

    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

    Düzenle

  2. Air Hog Smash Bots Motherboard Replacement: adım 2, 1 resimden 1.

    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

    Düzenle

  3. Air Hog Smash Bots Motherboard Replacement: adım 3, 1 resimden 1.

    • Remove the 3 AAA batteries.

    Düzenle

  4. Air Hog Smash Bots Motherboard Replacement, External Casing: adım 4, 2 resimden 1. Air Hog Smash Bots Motherboard Replacement, External Casing: adım 4, 2 resimden 2.

    • Using a Phillip #0 screwdriver to remove the eight 8 mm screws.

    Düzenle

  6. Air Hog Smash Bots Motherboard Replacement: adım 5, 2 resimden 1. Air Hog Smash Bots Motherboard Replacement: adım 5, 2 resimden 2.

    • Remove the upper armor of the Smash Bot.

    Düzenle

  7. Air Hog Smash Bots Motherboard Replacement: adım 6, 1 resimden 1.

    • Hold the upper body and slide out the bottom half of the Smash Bot.

    • The motor extends from the lower-body into the upper-body. Be careful to not damage the motor.

    Düzenle

  8. Air Hog Smash Bots Motherboard Replacement: adım 7, 1 resimden 1.

    • Peel back the four decal stickers that hold the front and back of the bot together.

    Düzenle

  9. Air Hog Smash Bots Motherboard Replacement: adım 8, 2 resimden 1. Air Hog Smash Bots Motherboard Replacement: adım 8, 2 resimden 2.

    • Use the plastic opening tool to pry the front and back of the lower body apart.

    • Carefully remove the back of the bot from the front.

    Düzenle

  10. Air Hog Smash Bots Motherboard Replacement, Motherboard: adım 9, 2 resimden 1. Air Hog Smash Bots Motherboard Replacement, Motherboard: adım 9, 2 resimden 2.

    • Remove four 4.75mm screws from the motherboard.

    Düzenle

  11. Air Hog Smash Bots Motherboard Replacement: adım 10, 2 resimden 1. Air Hog Smash Bots Motherboard Replacement: adım 10, 2 resimden 2.

    • Use the soldering iron to remove the two wires from the motherboard. Directions on how to solder can be found here.

    Düzenle

  12. Air Hog Smash Bots Motherboard Replacement: adım 11, 1 resimden 1.

    • Use the spudger to pry the motherboard away from the robot.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Brittany Frecker

Üyelik tarihi: 02/08/16

542 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

IUPUI, Team 1-1, Baechle Spring 2016 IUPUI, Team 1-1, Baechle Spring 2016 üyesi

IUPUI-BAECHLE-S16S1G1

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 208