Eşyalarını Tamir Et Topluluk Mağaza

Air Hog Smash Bots Motor Replacement

Giriş

This guide will teach you to remove the motor casing so you can replace the motor. A soldering iron will need to be used for this, directions on how to solder can be found here.

Neye ihtiyacın var

  1. Air Hog Smash Bots Motor Replacement, Batteries: adım 1, 1 resimden 1.

    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

    Düzenle

  2. Air Hog Smash Bots Motor Replacement: adım 2, 1 resimden 1.

    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

    Düzenle

  3. Air Hog Smash Bots Motor Replacement: adım 3, 1 resimden 1.

    • Remove the 3 AAA batteries.

    Düzenle

  4. Air Hog Smash Bots Motor Replacement, External Casing: adım 4, 2 resimden 1. Air Hog Smash Bots Motor Replacement, External Casing: adım 4, 2 resimden 2.

    • Using a Phillip #0 screwdriver to remove the eight 8 mm screws.

    Düzenle

  6. Air Hog Smash Bots Motor Replacement: adım 5, 2 resimden 1. Air Hog Smash Bots Motor Replacement: adım 5, 2 resimden 2.

    • Remove the upper armor of the Smash Bot.

    Düzenle

  7. Air Hog Smash Bots Motor Replacement: adım 6, 1 resimden 1.

    • Hold the upper body and slide out the bottom half of the Smash Bot.

    • The motor extends from the lower-body into the upper-body. Be careful to not damage the motor.

    Düzenle

  8. Air Hog Smash Bots Motor Replacement: adım 7, 1 resimden 1.

    • Peel back the four decal stickers that hold the front and back of the bot together.

    Düzenle

  9. Air Hog Smash Bots Motor Replacement: adım 8, 2 resimden 1. Air Hog Smash Bots Motor Replacement: adım 8, 2 resimden 2.

    • Use the plastic opening tool to pry the front and back of the lower body apart.

    • Carefully remove the back of the bot from the front.

    Düzenle

  10. Air Hog Smash Bots Motor Replacement, Motor: adım 9, 2 resimden 1. Air Hog Smash Bots Motor Replacement, Motor: adım 9, 2 resimden 2.

    • Using the Phillips #0 screwdriver, remove six 4.75mm screws.

    Düzenle

  11. Air Hog Smash Bots Motor Replacement: adım 10, 1 resimden 1.

    • Use the soldering iron to remove the blue and green wire from the motor casing. Directions on how to solder can be found here.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Brittany Frecker

Üyelik tarihi: 02/08/16

542 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

IUPUI, Team 1-1, Baechle Spring 2016 IUPUI, Team 1-1, Baechle Spring 2016 üyesi

IUPUI-BAECHLE-S16S1G1

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 152