/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap
Dünyanın en büyük onarım topluluğuna katılın
Alienware 17 R2 Power-Button Board Replacement

Alienware 17 R2 Power-Button Board Replacement

Terrence15

Terrence15 ve 2 diğer katkıda bulunanlar

En son November 2, 2019 tarihinde güncellendi

10 - 15 dakika
Orta
Topluluk-Katkılı Kılavuz

Neye ihtiyacın var

Aletler

  1. Alienware 17 R2 Power-Button Board Replacement, Removing the Base Panel: adım 1, 3 resimden 1. Alienware 17 R2 Power-Button Board Replacement, Removing the Base Panel: adım 1, 3 resimden 2. Alienware 17 R2 Power-Button Board Replacement, Removing the Base Panel: adım 1, 3 resimden 3.

    • WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Make sure the base panel is removed.

    • Make sure the palm rest is removed too.

    • Lift the latches and disconnect the touch-pad cable and the status-light cable from the power-button board.

    Düzenle

  2. Alienware 17 R2 Power-Button Board Replacement, Disconnecting the Power-Board Cable: adım 2, 2 resimden 1. Alienware 17 R2 Power-Button Board Replacement, Disconnecting the Power-Board Cable: adım 2, 2 resimden 2.

    • Disconnect the power-button cable from the power-button board.

    Düzenle

    • Remove the screws that secure the power-button board to the palm-rest assembly.

    Düzenle

    • Lift the power-button board off the palm-rest assembly.

    Düzenle

    • Align the screw holes on the power-button board with the screw holes on the palm-rest assembly.

    Düzenle

    • Replace the screws that secure the power-button board to the palm-rest assembly.

    Düzenle

    • Connect the power-button board cable to the power-button board.

    Düzenle

    • Slide the touch-pad cable and the status-light cable into their respective connectors on the power-button board and press down the latches to secure the cables.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Terrence15

Üyelik tarihi: 12/18/17

79.585 İtibar

441 adet Kılavuz yazıldı

Rozetler: 29

+26 tane daha rozet

Ekip

RampUP America, Inc. RampUP America, Inc. üyesi

Community

43 Üyeler

1.985 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 519