Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will show you how to disassemble your Anker 2.4 G Wireless Mouse to repair the scroll wheel with little to no experience required.

  1. Use the Phillips #0 screwdriver to remove the stickers that hide the screws you will need to access.
    • Use the Phillips #0 screwdriver to remove the stickers that hide the screws you will need to access.

  2. Remove the 4 screws to continue.
    • Remove the 4 screws to continue.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Pry the center of the mouse apart to separate the upper and lower housing of the boards. Pry the center of the mouse apart to separate the upper and lower housing of the boards.
    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

  5. Remove the wires from the white crimp headers, separating the upper and lower housing units of the mouse.
    • Remove the wires from the white crimp headers, separating the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

  6. Pull the scroll wheel to the left to remove it. This may take some force to remove. Pull the scroll wheel out parallel to the board rather than perpendicular to it.
    • Pull the scroll wheel to the left to remove it.

    • This may take some force to remove. Pull the scroll wheel out parallel to the board rather than perpendicular to it.

    • Replace/clean if needed.

    • If your mouse still does not work after this step, then continue to the next instruction.

  7. Desolder the three pins, then solder in the replacement part.
    • Desolder the three pins, then solder in the replacement part.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Vincent Lee

Üyelik tarihi: 23-01-2014

361 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 1-39, Maness Winter 2014 Cal Poly, Team 1-39, Maness Winter 2014 üyesi

CPSU-MANESS-W14S1G39

4 Üyeler

8 adet Kılavuz yazıldı

Bir Yorum

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 13

Son 30 gün: 78

Her zaman: 5,231