Eşyalarını Tamir Et Topluluk Mağaza

Beats Solo 3 Charging Port Replacement

Giriş

This is a charging port replacement guide for the Beats Solo 3 Headphones, Model number A1796. Symptoms that suggest the need for a charging port replacement can be found on our troubleshooting page.

Neye ihtiyacın var

  1. Beats Solo 3 Charging Port Replacement, Charging Port: adım 1, 1 resimden 1.

    • Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.

    • Be careful to not rip the ear pad fabric with your tools.

    Düzenle

  2. Beats Solo 3 Charging Port Replacement: adım 2, 1 resimden 1.

    • Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.

    • There are two screws in the big red circle at the bottom.

    Düzenle

  4. Beats Solo 3 Charging Port Replacement: adım 3, 1 resimden 1.

    • Desolder all wires connecting the circuit panel to the rest of the device.

    • There are two wires in the big red circle at the bottom and one in the small red circle above.

    Düzenle

  5. Beats Solo 3 Charging Port Replacement: adım 4, 2 resimden 1. Beats Solo 3 Charging Port Replacement: adım 4, 2 resimden 2.

    • After you desolder all wires you are able to remove and replace the charging port.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 57

Son 30 gün: 194

Her zaman: 4,737