Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Bissell SpotBot Pet Repair Brush Motor Replacement

Giriş

This replacement guide will cover how to replace the brush motor on the Bissell SpotBot Pet carpet cleaner.

Neye ihtiyacın var

  1. Bissell SpotBot Pet Repair Brush Motor Replacement, Brush Motor: adım 1, 1 resimden 1.

    • Set your Bissell SpotBot Pet on a flat surface to begin your repair.

    Düzenle

  2. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 2, 1 resimden 1.

    • Lift straight up on the right container to remove it from the vacuum.

    Düzenle

  3. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 3, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 3, 2 resimden 2.

    • Lift up on the tab on the top of the vacuum and then lift straight up on the left container to remove it.

    Düzenle

  4. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 4, 1 resimden 1.

    • Remove the vacuum tube by sliding it out of its holder on the side.

    Düzenle

  6. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 5, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 5, 2 resimden 2.

    • Unscrew the 4 screws on the top of the device and gently lift the top half up.

    • A ribbon cable is still attached to the underside of the top half.

    Düzenle

  7. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 6, 3 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 6, 3 resimden 2. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 6, 3 resimden 3.

    • Unplug the ribbon cable connecting the bottom half to the control panel on the top half. Set the top off to the side.

    Düzenle

  8. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 7, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 7, 2 resimden 2.

    • Unscrew the screw next to the white plastic wiring harness box. This will allow you to set the box off to the side.

    Düzenle

  9. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 8, 1 resimden 1.

    • Unscrew the screws on the plastic holder on the right side of the device. Remove the plastic holder from the vacuum.

    • Unscrew the screws that mount the vacuum motor to the device

    Düzenle

  10. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 9, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 9, 2 resimden 2.

    • Unplug the wires connecting the motor to the wiring harness.

    Düzenle

  11. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 10, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 10, 2 resimden 2.

    • Lift the white suction motor from the right side of the device. Lift it straight up and set it off to the side of the vacuum.

    Düzenle

  12. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 11, 2 resimden 1. Bissell SpotBot Pet Repair Brush Motor Replacement: adım 11, 2 resimden 2.

    • Remove the screws for the brush motor. This motor controls the automatic scrubbing mechanism.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Anthony Bonvino

Üyelik tarihi: 09/26/17

437 İtibar

2 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

Cal Poly, Team S7-G3, Banghart Fall 2017 Cal Poly, Team S7-G3, Banghart Fall 2017 üyesi

CPSU-BANGHART-F17S7G3

4 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

hi i think you did an amazing job of breaking down how to disasemble this spotbot. i have the exact same one and though it works great suction is amazing, the brushes dont spin and i took it apart completely except i didnt know where the motor was that controlled the brushes until reading this. thanks so much

art - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 23

Son 30 gün: 30

Her zaman: 1,457