Ana içeriğe geç

Giriş

Follow this guide to install a SIM card in the Blackberry Pearl 8100.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

Hiçbir parça belirtilmedi.

  1. Before working on the phone, be sure that the phone is turned off. Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
    • Before working on the phone, be sure that the phone is turned off.

    • Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.

    • Remove the battery located directly below back panel.

  2. Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).
    • Slide the larger of the two metal casings upward (in the direction pointed to as “unlock”).

  3. Lift the metal casing.
    • Lift the metal casing.

    • Insert an SD Card.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Robert Cronin

Üyelik tarihi: 08-04-2010

520 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 34-57, Forte Spring 2010 Cal Poly, Team 34-57, Forte Spring 2010 üyesi

CPSU-FORTE-S10S34G57

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 21

Her zaman: 8,746