Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.
Giriş
This guide will provide the steps to access the internal components including the motherboard where the copper button plates are located.
Neye ihtiyacın var
-
-
On the back of the device, remove the four 3/8" Torx head screws using the T-6 Torx bit.
-
-
-
-
Using tweezers gently go around the edges of the copper plate to remove the adhesive.
-
Neredeyse bitti!
To reassemble your device, follow these instructions in reverse order.
Sonuç
To reassemble your device, follow these instructions in reverse order.