Ana içeriğe geç

Giriş

Over time the tripod mount can become damaged and the tripod will no longer thread into the camera. This guide will explain how to replace the tripod mount.

  1. Turn the camera so the bottom of the camera is facing up.
    • Turn the camera so the bottom of the camera is facing up.

    • Remove the two Phillips screws from the bottom cover using the Phillips #00 Screwdriver.

  2. Lift and remove the bottom cover from the camera.
    • Lift and remove the bottom cover from the camera.

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Remove the three screws securing  the tripod mount using the Phillips #00 Screwdriver.
    • Remove the three screws securing the tripod mount using the Phillips #00 Screwdriver.

  5. Lift and remove the tripod mount from the camera.
    • Lift and remove the tripod mount from the camera.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Ben Barber

Üyelik tarihi: 04-10-2011

408 İtibar

2 adet Kılavuz yazıldı

Takım

UW Stout, Team 5-1, Zhou Fall 2011 UW Stout, Team 5-1, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S5G1

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 11

Son 30 Gün: 47

Her zaman: 5,184