Giriş

Removal of all outer casing in order to access the power button.

Remove the battery using the 00 screwdriver. Remove the neck strap
  • Remove the battery using the 00 screwdriver.

  • Remove the neck strap

  • Remove the plastic casing around the viewing lens

Yorum Ekle

Remove these screws. Remove these screws. Remove these screws.
  • Remove these screws.

Yorum Ekle

Remove these screws. Remove these screws. Remove these screws.
  • Remove these screws.

Yorum Ekle

Remove the screws below the view finder. Remove the screw of the focus wheel right from the view finder using the 000 screw driver Remove the top screws.
  • Remove the screws below the view finder.

  • Remove the screw of the focus wheel right from the view finder using the 000 screw driver

  • Remove the top screws.

  • Using your fingers, remove the left wire connecting the microphone.

Yorum Ekle

Use your fingers to complete the following steps. Remove the black wire beneath the power switch. Remove the wire on the left side shown. Remove the two ribbon wires on the right side.
  • Use your fingers to complete the following steps. Remove the black wire beneath the power switch.

  • Remove the wire on the left side shown.

  • Remove the two ribbon wires on the right side.

Yorum Ekle

Remove the circled wires on the front with your fingers. Remove the top casing and replace it with a new one. This casing should include a new power switch. Reconnect all wires and replace the back and front casings.
  • Remove the circled wires on the front with your fingers.

  • Remove the top casing and replace it with a new one. This casing should include a new power switch. Reconnect all wires and replace the back and front casings.

Yorum Ekle

Sonuç

This guide demonstrates how to replace the power button. To reassemble your device, follow these instructions in reverse order.

Stefan Seitler

Üyelik tarihi: 27-10-2014

351 İtibar

2 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 1-4, Duarte Fall 2014 UMass Dartmouth, Team 1-4, Duarte Fall 2014 üyesi

UMASSD-DUARTE-F14S1G4

3 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

The top cover assembly part number for the Rebel T2i/EOS 550D is CG2-2756-010.

ogminlo - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 9

Son 30 Gün: 32

Her zaman: 1,704