Canon PowerShot SD780 IS Flash Capacitor Replacement

Giriş

This replacement guide will show you how to access the flash capacitor of the Canon Powershot SD780 IS.

Be extremely careful in dealing with the capacitor as it can store a large electrical charge for a long period of time. The safest way to handle a capacitor is by discharging it. You can make a capacitor discharge tool by following the Constructing a Capacitor Discharge Tool guide.

Neye ihtiyacın var

Adım 1 Flash Capacitor

Begin by making sure the camera is turned off and the battery has been removed to avoid any shock injuries.

Düzenle

Adım 2

Having removed the battery, you can begin removing the outermost screws on the camera to allow for case replacement. There are 5 screws in total. This will require a Philips head # 00 screwdriver.
Keep track of where each screw came from in order to avoid complications during the reassemble process.
The screws highlighted by the red square in the second image (on the left side in the first image) are 2.0 mm long.

Düzenle

Adım 3

Remove the front panel of the camera case to expose the top left copper strip, and gently pull the strip upward to disconnect from camera.

Düzenle

Adım 4

Remove the screw on the far left hand side of the camera.

Düzenle

Adım 5

Now that you have removed all of the screws, carefully pull the case apart at the seem. The case will detach from the camera in two pieces.

Düzenle

Adım 6

Locate the image stabilizer on the top right of the camera and pry the internal battery away from the camera. Having done this, the internal battery can be removed easily.

Düzenle