Eşyalarını Tamir Et Topluluğa Katılın Mağaza

Canon Powershot A610 Speaker Replacement

Giriş

The Canon Powershot A610 speaker is on the underside of the top casing and will involve some minor technical skills.

What you need

  1. Canon Powershot A610 Speaker Replacement, Speaker: adım 1, 3 resimden 1. Canon Powershot A610 Speaker Replacement, Speaker: adım 1, 3 resimden 2. Canon Powershot A610 Speaker Replacement, Speaker: adım 1, 3 resimden 3.

    • Remove the three screws attaching the side panel using a Phillips #00 screwdriver.

    • Remove the side paneling from the camera.

    • Remove the two remaining screws attached to the frame of the camera.

    Düzenle

  2. Canon Powershot A610 Speaker Replacement: adım 2, 1 resimden 1.

    • Remove the two screws on the bottom panel of the camera.

    Düzenle

  3. Canon Powershot A610 Speaker Replacement: adım 3, 1 resimden 1.

    • Open the battery cover.

    • Remove the four screws inside.

    • One screw is located on the top side of the bottom cover. The remaining three screws are located at the bottom of the battery compartment.

    • Close the battery cover.

    Düzenle

  4. Canon Powershot A610 Speaker Replacement: adım 4, 2 resimden 1. Canon Powershot A610 Speaker Replacement: adım 4, 2 resimden 2.

    • Open the "DIGITAL AV OUT" door on the camera.

    • Remove the three screws.

    • Remove the door from the camera.

    Düzenle

  6. Canon Powershot A610 Speaker Replacement: adım 5, 1 resimden 1.

    • Gripping the sides of the top cover, gently pull apart the top cover from the camera.

    • The top cover does not completely detach.

    Düzenle

  7. Canon Powershot A610 Speaker Replacement: adım 6, 2 resimden 1. Canon Powershot A610 Speaker Replacement: adım 6, 2 resimden 2.

    • Open the battery cover.

    • Gently pull apart the front cover from the camera.

    • This may require some force. Be careful not to break the plastic.

    Düzenle

  8. Canon Powershot A610 Speaker Replacement: adım 7, 2 resimden 1. Canon Powershot A610 Speaker Replacement: adım 7, 2 resimden 2.

    • Using an opening tool, push the black attachment away from the white connection piece to detach the connector ribbon.

    Düzenle

  9. Canon Powershot A610 Speaker Replacement: adım 8, 1 resimden 1.

    • Remove the 3 mm screw holding the metal frame.

    Düzenle

  10. Canon Powershot A610 Speaker Replacement: adım 9, 2 resimden 1. Canon Powershot A610 Speaker Replacement: adım 9, 2 resimden 2.

    • Use an unfolded paper clip to push the speaker from the top of the casing out towards the bottom.

    • Use a bit of force as the speaker is glued into the top casing.

    • There is a soft fabric speaker cover separating the speaker from the casing. Make sure not to remove it from its position in the housing.

    Düzenle

  11. Canon Powershot A610 Speaker Replacement: adım 10, 1 resimden 1.

    • Desolder the speaker at the two solder points and reattach the new speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

Matthew Ramirez

Üyelik tarihi: 01/20/11

625 İtibar

5 adet Kılavuz yazıldı

Badges: 11

+8 tane daha rozet

Team

Cal Poly, Team 11-26, Maness Winter 2011 Cal Poly, Team 11-26, Maness Winter 2011 üyesi

CPSU-MANESS-W11S11G26

3 Üyeler

9 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 2,810