Ana içeriğe geç

CrystalView NB4-35788 Auxiliary Speakers Replacement

Neye ihtiyacın var

  1. CrystalView NB4-35788 Auxiliary Speakers Replacement, Auxiliary Speakers: adım 1, 1 resimden 1.
    • Power off the device before beginning disassembly.

    • Using a Phillips #00 Screwdriver, take out the following screws:

    • Two 6 mm screws

    • Three 4 mm screws

    • Four 3 mm screws

    • These screws can be taken out in any order.

  2. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 2, 1 resimden 1.
    • Using a Phillips #00 Screwdriver, remove the screws located under the top two standoffs.

  3. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 3, 1 resimden 1.
    • Remove the cover off the back of the device.

  4. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 4, 1 resimden 1.
    • Two speakers can be found on the device, one in the lower-right corner and one in the lower left-corner.

  5. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 5, 1 resimden 1.
    • Gently pull up on the speaker to remove it. Repeat this for the other speaker.

  6. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 6, 2 resimden 1. CrystalView NB4-35788 Auxiliary Speakers Replacement: adım 6, 2 resimden 2.
    • De-solder the red and black wires to disconnect the old speaker.

    • Be careful while using a soldering iron as it is extremely hot.

    • Follow the How To Solder and Desolder Connections guide for help.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alex Stokes

Üyelik tarihi: 01/12/17

101 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 135