Ana içeriğe geç

Dangle Earrings Jump Ring Replacement

Neye ihtiyacın var

  1. Dangle Earrings Jump Ring Replacement, Jump Ring: adım 1, 1 resimden 1.
    • Locate where the earring stud/hook has detached.

    • Look at the two pieces of the dangle earrings for a small loop or jump ring on both pieces.

  2. Dangle Earrings Jump Ring Replacement: adım 2, 1 resimden 1.
    • Using a chain nose plier, carefully grip the jump ring by its side.

    • Use a cutting plier to cut a small opening in the loop.

  3. Dangle Earrings Jump Ring Replacement: adım 3, 1 resimden 1.
    • With both pliers use the cutting plier to gently grip the side of the small jump ring.

    • Using the small nose chain pliers pull back on the small jump ring to create an opening.

  4. Dangle Earrings Jump Ring Replacement: adım 4, 1 resimden 1.
    • With the small chain nose pliers grip the jump ring.

    • Insert the stud/hook portion of the earring into the jump ring.

  5. Dangle Earrings Jump Ring Replacement: adım 5, 1 resimden 1.
    • Use the jump ring to reattach the the stud.

    • With the small chain nose pliers grip the jump ring.

    • Insert the main portion of the earring into the jump ring with the stud/hoop.

  6. Dangle Earrings Jump Ring Replacement: adım 6, 1 resimden 1.
    • Use both pliers to close the loop.

    • Firmly grip the edge of the loop using a pair of cutting pliers.

    • With a pair of small chain grip pliers gently push the end of the jump ring forward to close the loop.

  7. Dangle Earrings Jump Ring Replacement: adım 7, 1 resimden 1.
    • Gently tug on either side of the earring to ensure the loop is closed securely.

    • If this test fails, refer back to step 6.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Angelika Dela Torre

Üyelik tarihi: 01/16/22

145 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 15

Her zaman: 342