Giriş
If the motor of your drill is not operating properly or not operating at all, this guide will show you how to replace the motor of your drill.
Neye ihtiyacın var
-
-
Compress the buttons on either side of the battery and lift the drill away from battery.
-
-
-
-
Lift drill mechanism out of the shell.
-
Desolder the red and black wires from the motor.
-
Learn more about soldering here.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
2 farklı kişi bu kılavuzu tamamladı.
3 Yorum
Unplug the wires from the trigger switch....don't unsolder.
New motor comes with wires.
Thanks for the heads up on the wires