Eşyalarını Tamir Et Topluluk Mağaza

Dexcom G6 Receiver Charging Port Replacement

Neye ihtiyacın var

  1. Dexcom G6 Receiver Charging Port Replacement, Display and Front Bezel: adım 1, 1 resimden 1.

    • Unscrew the 6 Torx T5 screws from the back of the device

    Düzenle

  2. Dexcom G6 Receiver Charging Port Replacement: adım 2, 2 resimden 1. Dexcom G6 Receiver Charging Port Replacement: adım 2, 2 resimden 2.

    • Use a spudger to lift up the screen assembly ribbon cable flap, then remove the ribbon cable.

    • Screen Information: Model AM0310R-04 Lot # NHT18080052

    Düzenle

  4. Dexcom G6 Receiver Charging Port Replacement, Charging Port: adım 3, 1 resimden 1.

    • Using a spudger, unplug the Charging Port connector from the motherboard.

    Düzenle

  5. Dexcom G6 Receiver Charging Port Replacement: adım 4, 1 resimden 1.

    • Remove the 2 silver Torx T5 screws holding the charging port down.

    Düzenle

  6. Dexcom G6 Receiver Charging Port Replacement: adım 5, 1 resimden 1.

    • Remove the Charging Port Assembly from the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Andrew S

Üyelik tarihi: 07/30/21

14.993 İtibar

8 adet Kılavuz yazıldı

Rozetler: 30

+27 tane daha rozet

5 Yorum

Where can the part be purchased?

Mayor of Koala Corner - Yanıt

I'm not sure if there is a replacement charging port assembly available online. If you're good at microsoldering, you could replace the surface mount micro USB port on the assembly.

Andrew S -

where can the part be purchased?

Mayor of Koala Corner - Yanıt

would a cell phone repair shop be able to do this?

Ron Magliacane - Yanıt

If they are comfortable with it. Tell them it will probably require microsoldering.

Andrew S -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 13

Her zaman: 645