Eşyalarını Tamir Et Topluluk Mağaza

DigiLand DL700D Motherboard Replacement

Giriş

This guide will show how to replace the mainboard in the event of failure. The process is relatively simple, though some soldering will be required. It is advised to review soldering techniques here.

Neye ihtiyacın var

  1. DigiLand DL700D Motherboard Replacement, Battery: adım 1, 3 resimden 1. DigiLand DL700D Motherboard Replacement, Battery: adım 1, 3 resimden 2. DigiLand DL700D Motherboard Replacement, Battery: adım 1, 3 resimden 3.

    • Remove the device's back cover using the plastic opening tool.

    Düzenle

  2. DigiLand DL700D Motherboard Replacement: adım 2, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 2, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 2, 3 resimden 3.

    • Remove the three pieces of adhesive placed over the edges of the battery.

    Düzenle

  3. DigiLand DL700D Motherboard Replacement: adım 3, 1 resimden 1.

    • Remove the wifi antenna from the bottom of the battery.

    Düzenle

  4. DigiLand DL700D Motherboard Replacement: adım 4, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 4, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 4, 3 resimden 3.

    • Heat up the soldering iron, proceed to desolder and remove the battery connections.

    Düzenle

  6. DigiLand DL700D Motherboard Replacement: adım 5, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 5, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 5, 3 resimden 3.

    • Remove the battery from the casing using a nylon spudger.

    • Be careful not to puncture the battery casing.

    • Carefully peel the battery free from the casing.

    Düzenle

  7. DigiLand DL700D Motherboard Replacement, Motherboard: adım 6, 1 resimden 1.

    • Desolder the WiFi antenna from the motherboard.

    Düzenle

  8. DigiLand DL700D Motherboard Replacement: adım 7, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 7, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 7, 3 resimden 3.

    • Remove 3 ribbon cables attached to the motherboard by lifting the plastic retainer, then pulling the cable out.

    Düzenle

  9. DigiLand DL700D Motherboard Replacement: adım 8, 2 resimden 1. DigiLand DL700D Motherboard Replacement: adım 8, 2 resimden 2.

    • Remove adhesive attaching the motherboard to the casing.

    Düzenle

  10. DigiLand DL700D Motherboard Replacement: adım 9, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 9, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 9, 3 resimden 3.

    • Remove the three 2.5 mm Phillips #1 screws holding the motherboard to the case.

    Düzenle

  11. DigiLand DL700D Motherboard Replacement: adım 10, 3 resimden 1. DigiLand DL700D Motherboard Replacement: adım 10, 3 resimden 2. DigiLand DL700D Motherboard Replacement: adım 10, 3 resimden 3.

    • Remove motherboard from the case and replace.

    Düzenle
Sonuç

To reassemble, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Justin Edwards

Üyelik tarihi: 03/29/18

241 İtibar

2 adet Kılavuz yazıldı

Rozetler: 3

Ekip

IUPUI, Team S3-G4, Harley Spring 2018 IUPUI, Team S3-G4, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S3G4

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 5

Her zaman: 264