DigiTech RP70 LED Light Replacement - iFixit Tamir Kılavuzu

Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

If the LED light is broken, or dead, this guide will teach you how to remove the broken component for replacement.

Neye ihtiyacın var

Adım 1 Motherboard

DigiTech RP70 LED Light Replacement, Motherboard: adım 1, 2 resimden 1.

DigiTech RP70 LED Light Replacement, Motherboard: adım 1, 2 resimden 2.

Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.
Remove the four 8mm Phillips #0 screws located on the back panel.

FixBot'a Sor

Adım 2

DigiTech RP70 LED Light Replacement: adım 2, 2 resimden 1.

DigiTech RP70 LED Light Replacement: adım 2, 2 resimden 2.

Remove the back panel to expose the motherboard.

FixBot'a Sor

Adım 3

DigiTech RP70 LED Light Replacement: adım 3, 1 resimden 1.

Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

FixBot'a Sor

Adım 4

DigiTech RP70 LED Light Replacement: adım 4, 1 resimden 1.

Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

FixBot'a Sor

Adım 5 LED Light

DigiTech RP70 LED Light Replacement, LED Light: adım 5, 1 resimden 1.

Desolder the back of the motherboard where the LED light is located.

FixBot'a Sor

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

Yazar

3 tane daha katılımcı ile

Elijah Smith

Üyelik tarihi: 09/10/18

738 İtibar

6 adet Kılavuz yazıldı

+7 tane daha rozet

Ekip

Appalachian State University, Team S2-G2, Menagarishvili Fall 2018 Appalachian State University, Team S2-G2, Menagarishvili Fall 2018 üyesi

APSU-MENAGARISHVILI-F18S2G2

3 Üyeler

6 adet Kılavuz yazıldı

0Kılavuz Yorumları

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 28

Her zaman: 531