Eşyalarını Tamir Et Topluluk Mağaza

Disassembling Canon PowerShot SD850 IS Case Removal

Giriş

How to remove the outer casing of your Canon PowerShot SD850 IS.

Neye ihtiyacın var

  1. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: adım 1, 3 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: adım 1, 3 resimden 2. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: adım 1, 3 resimden 3.

    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

    Düzenle

  2. Disassembling Canon PowerShot SD850 IS Case Removal: adım 2, 2 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal: adım 2, 2 resimden 2.

    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

    Düzenle

  3. Disassembling Canon PowerShot SD850 IS Case Removal, Case: adım 3, 2 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal, Case: adım 3, 2 resimden 2.

    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

    Düzenle

  5. Disassembling Canon PowerShot SD850 IS Case Removal: adım 4, 3 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal: adım 4, 3 resimden 2. Disassembling Canon PowerShot SD850 IS Case Removal: adım 4, 3 resimden 3.

    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

    Düzenle

  6. Disassembling Canon PowerShot SD850 IS Case Removal: adım 5, 2 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal: adım 5, 2 resimden 2.

    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

    Düzenle

  7. Disassembling Canon PowerShot SD850 IS Case Removal: adım 6, 2 resimden 1. Disassembling Canon PowerShot SD850 IS Case Removal: adım 6, 2 resimden 2.

    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

    Düzenle

  8. Disassembling Canon PowerShot SD850 IS Case Removal: adım 7, 1 resimden 1.

    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

    Düzenle

  9. Disassembling Canon PowerShot SD850 IS Case Removal: adım 8, 1 resimden 1.

    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Peter Tran

Üyelik tarihi: 10/06/10

225 İtibar

6 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

Cal Poly, Team 20-7, Maness Fall 2010 Cal Poly, Team 20-7, Maness Fall 2010 üyesi

CPSU-MANESS-F10S20G7

6 Üyeler

7 adet Kılavuz yazıldı

1Rehber Yorum

Had to exchange a battery/SD card cover on an Ixus970IS. This guide very helpful showing the way due to similar layout of the Ixus and the PS850IS! Thanx a lot! :-)

KBK Copenhagen DK

Keld Baden-Kristensen - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 36

Her zaman: 4,417