Disassembling GravityLight Back Panel
Neye ihtiyacın var
Aletler
-
-
Flip the GravityLight on its back and place it on a sturdy surface.
-
Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.
-
-
-
Firmly grasp both parts of the GravityLight body and pull them apart.
-
-
-
Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.
-
Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.
-
-
-
Firmly grasp both parts of the back panel and pull them apart.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.